钻井废液的固液分离工艺与设备

影响钻井废液固液分离的因素包括钻井废液的稀释比例、脱稳处理药剂的种类和加量、固液分离设备。文章介绍了钻井废液处理的基本流程,分析了钻井废液pH值对固液分离效果的影响,论述了卧式螺旋卸料沉降离心机的基本结构、设备参数和操作参数对固液分离效果的影响。     

赤泥碱性调控研究进展

赤泥是氧化铝工业生产过程产生的强碱性固体废弃物,资源化利用难、环境风险高,严重制约了氧化铝行业的可持续发展.赤泥土壤化是实现规模化处置赤泥的一种可行方法,而碱性调控则是赤泥土壤化的关键环节.论文在综述氧化铝生产过程碱性物质形成过程的基础上,从可溶性碱和化学结合碱角度分析了赤泥碱性物质的赋存状态,阐述了国内外化学调碱法和生物调碱法的研究进展和碱性转化机制,剖析了赤泥碱性调控方面存在的问题,提出了赤泥碱性调控研究的发展方向.这将为赤泥规模化处置和堆场生态重建、保障氧化铝工业的健康发展提供科学参考.     

Effect of lubricant sulfur on the morphology and elemental composition of diesel exhaust particles

This work investigates the effects of lubricant sulfur contents on the morphology, nanostructure, size distribution and elemental composition of diesel exhaust particle on a light-duty diesel engine. Three kinds of lubricant (LS-oil, MS-oil and HS-oil, all of which have different sulfur contents: 0.182%, 0.583% and 1.06%, respectively) were used in this study. The morphologies and nanostructures of exhaust particles were analyzed using high-resolution transmission electron microscopy (TEM). Size distributions of primary particles were determined through advanced image-processing software. Elemental compositions of exhaust particles were obtained through X-ray energy dispersive spectroscopy (EDS). Results show that as lubricant sulfur contents increase, the macroscopic structure of diesel exhaust particles turn from chain-like to a more complex agglomerate. The inner cores of the core-shell structure belonging to these primary particles change little; the shell thickness decreases, and the spacing of carbon layer gradually descends, and amorphous materials that attached onto outer carbon layer of primary particles increase. Size distributions of primary particles present a unimodal and normal distribution, and higher sulfur contents lead to larger size primary particles. The sulfur content in lubricants directly affects the chemical composition in the particles. The content of C (carbon) decreases as sulfur increases in the lubricants, while the contents of O (oxygen), S (sulfur) and trace elements (including S, Si (silicon), Fe (ferrum), P (phosphorus), Ca (calcium), Zn (zinc), Mg (magnesium), Cl (chlorine) and Ni (nickel)) all increase in particles.     

炼化企业分析化验岗位职业病危害防治措施研究

采用现场职业卫生学调查方法了解炼化企业分析化验岗位接触各类危害因素情况,对正常情况下分析化验工作场所进行各类职业病危害因素检测,同时测量各通风橱控制点风速、排风罩罩口风速;通风橱(风机通风量增加、管道改造)以及排风罩改造后,再次进行控制点风速测量、工作场所危害因素采样检测,对比改造前后测量数据,探讨分析化验岗位职业病危害防治措施。结果显示,工作场所通风设施的风机选型、管道合理化布置、排风罩围挡的设置、补风等因素均对通风橱、排风罩控制点风速产生影响;通风设施改造后工作场所职业病危害因素浓度有所降低。由此可见,炼化企业分析化验工作场所通风设施是职业病危害防治的重要措施。     

本溪地区灰霾天气时空分布特征分析研究

近年来,灰霾天气对本溪地区的影响越来越严重,由霾引发的环境污染对人们生产生活造成的影响也越来越大,因此对灰霾天气发生的时空分布特征的研究就尤为重要.文章运用本溪地面观测2012-2014年本溪市、本溪县、桓仁县3个国家基本站的观测资料,对霾日进行筛选和统计,分析本溪地区霾日发生的时空分布特征,本溪地区霾日数呈逐年增长趋势,2014年霾日数增长迅速.本溪地区冬半年霾日明显多于夏半年,两县霾日少于市区,空气质量优于市区.     

新型活性污泥的培养及其处理高盐有机废水

在好氧反应器中,将海泥通过海水和营养物质培养成新型的活性污泥,在处理含盐废水时有较好的活性和沉降性能,对这种新型的活性污泥我们称其为海洋活性污泥。通过10周的培养,海泥的污泥体积指数（SVI）从最初的19 mL/g升高到70 mL/g,对有机废水处理12 h后高锰酸盐指数（CODMn）降解率达到90%,氨氮降解率达到45%。在污泥培养时,营养物质投加频率为一日一次最有利于污泥的培养,又葡萄糖比淀粉更有利于污泥的培养。对于含盐有机废水的处理,海洋活性污泥也比传统活性污泥有优势,甚至对于含盐量6%的高盐有机废水,处理12 h后能达到CODMn降解率达为70%,氨氮降解率达到30%。当NaCl浓度高于6%,海洋活性污泥仍具有一定的活性,但仍能观察到明显的抑制作用。此外,海洋活性污泥具有比传统活性污泥更强的盐度变化抗性,甚至在低盐度下盐浓度变化时,海洋活性污泥的氨氮降解稳定性也优于传统活性污泥。     

Aquatic biomonitoring of Giardia cysts and Cryptosporidium oocysts in peninsular Malaysia

An aquatic biomonitoring of Giardia cysts and Cryptosporidium oocysts in river water corresponding to five villages situated in three states in peninsular Malaysia was determined. There were 51.3 % (20/39) and 23.1 % (9/39) samples positive for Giardia and Cryptosporidium (oo)cysts, respectively. Overall mean concentration between villages for Giardia cysts ranged from 0.10 to 25.80 cysts/l whilst Cryptosporidium oocysts ranged from 0.10 to 0.90 oocysts/l. Detailed results of the river samples from five villages indicated that Kuala Pangsun 100 % (9/9), Kemensah 77.8 % (7/9), Pos Piah 33.3 % (3/9) and Paya Lebar 33.3 % (1/3) were contaminated with Giardia cysts whilst Cryptosporidium (oo)cysts were only detected in Kemensah (100 %; 9/9) and Kuala Pangsun (66.6 %; 6/9). However, the water samples from Bentong were all negative for these waterborne parasites. Samples were collected from lower point, midpoint and upper point. Midpoint refers to the section of the river where the studied communities are highly populated. Meanwhile, the position of the lower point is at least 2 km southward of the midpoint and upper point is at least 2 km northward of the midpoint. The highest mean concentration for (oo)cysts was found at the lower points [3.15?±?6.09 (oo)cysts/l], followed by midpoints [0.66?±?1.10 (oo)cysts/l] and upper points [0.66?±?0.92 (oo)cysts/l]. The mean concentration of Giardia cysts was highest at Kuala Pangsun (i.e. 5.97?±?7.0 cysts/l), followed by Kemensah (0.83?±?0.81 cysts/l), Pos Piah (0.20?±?0.35 cysts/l) and Paya Lebar (0.10?±?0.19 cysts/l). On the other hand, the mean concentration of Cryptosporidium oocysts was higher at Kemensah (0.31?±?0.19 cysts/l) compared to Kuala Pangsun (0.03?±?0.03cysts/l). All the physical and chemical parameters did not show significant correlation with both protozoa. In future, viability status and molecular characterisation of Giardia and Cryptosporidium should be applied to identify species and genotypes/subgenotypes for better understanding of the epidemiology of these waterborne parasites.     

计算毒理学在内分泌干扰物筛选上的应用和展望

内分泌干扰物通过干扰内分泌系统导致多种疾病,如生殖疾病、肥胖症甚至癌症。然而,面对环境中大量潜在的内分泌干扰物,传统的体外、体内评估方法由于成本高、耗时长等问题,难以实现内分泌干扰物的高通量筛查。计算毒理学逐渐发展成为被美国环保局(Environmental Protection Agency,EPA)、经济合作与发展组织(Organization for Economic Co-operation and Development,OECD)等机构所推荐的内分泌干扰物筛选与预测方法。本文综述了计算毒理学在内分泌干扰物筛选上的进展,主要包括分子对接和分子动力学模拟的应用,并对有害结局路径(adverse outcome pathway,AOP)的方法进行介绍和展望。     

Effects of prenatal exposure to bisphenols on newborn leucocyte telomere length: a prospective birth cohort study in China

Environmental Science and Pollution Research - Telomere length (TL) at birth is related to diseases that may arise in the future and long-term health. Bisphenols exhibit toxic effects and can cross...     

Characteristics of particulate matter emissions from toy cars with electric motors

Aerosol emissions from toy cars with electric motors were characterized. Particle emission rates from the toy cars, as high as 7.47 × 10⁷ particles/s, were measured. This emission rate is lower than other indoor sources such as smoking and cooking. The particles emitted from toy cars are generated from spark discharges inside the electric motors that power the toy cars. Size distribution measurements indicated that most particles were below 100 nm in diameter. Copper was the dominant inorganic species in these particles. By deploying aerosol mass spectrometers, high concentrations of particulate organic matter were also detected and characterized in detail. Several organic compounds were identified using a thermal desorption aerosol gas chromatography. The mass size distribution of particulate organic matter was bimodal. The formation mechanism of particulate organic matter from toy cars was elucidated.

Implications:?A possible new source of indoor air pollution, particles from electric motors in toy cars, was identified. This study characterized aerosol emissions from toy cars in detail. Most of these particles have a diameter less than 100 nm. Copper and some organics are the major components of these particles. Conditions that minimize these emissions were determined.